When the clock stops lighting up, it can be annoying. So you have to change the display bulb of this Volkswagen Iltis. Although the dashboard remains functional, certain information is missing in order to circulate comfortably. This manipulation is not complex to execute, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To perform this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Volkswagen-Iltis

How to change the bulb on the Volkswagen Iltis display

Depending on the release years, the methodology may vary slightly. It remains likely that some covers or screws differ. Here is the logic to follow in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
  • Once the cover is completely removed, you need disconnect connectors which connect to the clock bulb of the Volkswagen Iltis. You can thus dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered specific problems.