When the clock runs out of light, it can be annoying. So you have to replace the display bulb of the Volkswagen Iroc. Although the dashboard remains functional, we are missing several pieces of information in order to drive comfortably. This operation is not complex to perform, but requires a minimum of rigor. We also advise you to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To carry out this operation, plan about a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Volkswagen Iroc display
Depending on the production dates, the method may vary slightly. Several covers or screws may not be identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of this Volkswagen Iroc. You can therefore dismantle all the block connectors, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave a comment if you have encountered any particular concerns.