When the clock stops working, it can be annoying. So you have to replace the display bulb of the Volkswagen Jetta. Even if the dashboard is still operational, it lacks several information to circulate in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially concerning the connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Volkswagen-Jetta

How to change the display bulb of the Volkswagen Jetta

Depending on the years of circulation, the procedure may vary a little. It is likely that some covers or screws are not identical. So that's the general process to follow.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may have to remove several screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of this Volkswagen Jetta. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension as well obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered particular malfunctions.