Changing the ceiling light bulb on a Citroen Osmose is a very repair easy to perform . No need to be a great mechanic, it requires basic tools and no knowledge of mechanics. To carry out this operation, plan about 10 minutes . However, before starting the work, you must make sure that the problem comes from the bulb. We will discover first of all how to know where the problem came from, then how to change the faulty bulb.change-bulb-ceiling-Citroen-Osmose

The ceiling lighting of your Citroen Osmose does not work any more: the different reasons.

The bulb is defective . This is of course the most common cause. Whatever happens, you will have to remove the lighting unit from the Citroen Osmose. To do this, follow the steps in the next paragraph. To control it is very easy. If ever it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, it will be necessary to check that the current flows properly thanks to a voltmeter. Try to measure the voltage on both sides of the connector. An electrical concern . It is less frequent, however it can still happen on a Citroen Osmose. It happens that there is a false contact, or that a connector is dirty. In this case, check the tension at both ends. If the current does not pass properly, you must follow the electric wires until you find the source of the failure. It also happens that the connectors are dirty. In this case, it will be necessary to clean them using a specialized product and measure the tension.

How to replace the light bulb on your Citroen Osmose

Now that you have found the source of the failure, you are certain that the problem came from the bulb. We will see how to change the bulb of the ceiling light step by step on a Citroen Osmose.

  • Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
  • Disconnect the connector
  • Disassemble the ceiling light to have access to the bulb
  • Remove the bulb and compare it with the new one. Naturally, the size and the base must match
  • Install the new bulb carefully
  • Replace the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling bulb of your Citroen Osmose will work normally. Enjoy the road.