Replace the light bulb of a Citroen Tubik ceiling light is a very manipulation easy to make . There is no need to be an excellent mechanic, it requires basic tools and no mechanical knowledge. To carry out this replacement, plan ten minutes . However before launching into repairs, it is necessary to make sure that the problem comes from the bulb. We will first see how to find out where the problem came from, then how to replace the defective bulb.change-bulb-ceiling-Citroen-Tubik

The ceiling bulb of your Citroen Tubik does not work anymore: the different origins.

The bulb is defective . This is obviously the most common cause. Whatever happens, you will have to remove the lighting unit from the Citroen Tubik. In order to do this, it is necessary to follow the steps in the next part. To control it is very easy. If ever it is a filament bulb, you can visually check that the filament is broken. If on the other hand it is an LED bulb, it is necessary to check that the electricity circulates correctly thanks to a voltmeter. Remember to measure the voltage on the two poles of the connector. An electrical concern . It's less common, but it can still happen on this Citroen Tubik. There may be a short juice, or a connector may be dirty. In this situation, inspect the tension at both poles. If the electricity does not pass correctly, you will have to follow the wiring until you see the cause of the failure. The connectors may also be dirty. In this case, you will have to clean them with a specialized product and measure the tension again.

How to replace the light bulb on your Citroen Tubik

Once you have found the cause of the failure, you are sure that the problem came from the bulb. We will see how to replace the light bulb step by step on this Citroen Tubik.

  • Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
  • Disconnect the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it with the new one. Obviously, the dimensions and the base must be identical
  • Install the new bulb carefully
  • Reposition the connectors and the ceiling light in the other direction

You can now switch on the ignition and check that the bulb works properly. It's good, it's done! The ceiling bulb of your Citroen Tubik will work normally. Good walk.