Changing the headlight bulb of a Hyundai Ix55 is an extremely simple to make . No need to be a great handyman, this repair requires few tools and no mechanical knowledge. To do this, count ten minutes . However, before you start the work, you will have to make sure that the problem must come from the bulb. We will first see how to know where the problem must come from, then how to change the faulty bulb.change-bulb-ceiling-light-Hyundai-Ix55

The ceiling light of your Hyundai Ix55 no longer works: various reasons.

The bulb is defective . This is of course the most frequent reason. Whatever happens, you will have to disassemble the light unit from your Hyundai Ix55. In order to do this, you will have to follow the steps in the next paragraph. To check it is extremely simple. If it is ever a filament bulb, you can visually check that its filament is broken. If ever on the other hand it is an LED bulb, it will be necessary to check that the current circulates correctly thanks to a voltmeter. Try to measure the voltage on the two poles of the connector. An electrical concern . It is less common, but it can still happen on this Hyundai Ix55. It happens that there is a short juice, or that a connector is dirty. In this case, inspect the voltage at both ends. If the current does not flow correctly, you will have to follow the wiring until you find the cause of the failure. It also happens that the connectors are dirty. So, you will have to clean them with a specialized product and re-measure the voltage.

How to replace the ceiling bulb of your Hyundai Ix55

Now that you have found the cause of the failure, you are sure the problem must be with the bulb. Let's see how to change the ceiling light bulb point by point on this Hyundai Ix55.

  • Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to access the bulb
  • Remove the bulb and compare it with the new one. It is of course necessary that the dimensions and the base correspond
  • Place the new bulb carefully
  • Replace the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. It's good, it's done! The interior light bulb of your Hyundai Ix55 should work normally. Enjoy the road.