Replace the light bulb of a hyundai lantra is a very operation easy to execute . There is no need to be a great mechanic, it requires basic tools and no knowledge of mechanics. To carry out this replacement, count about 10 minutes . However, before starting the work, you will have to make sure that the problem must come from the bulb. We will find out first how to know where the problem is coming from, then how to replace the burnt out bulb.change-bulb-ceiling-hyundai-lantra

The ceiling bulb of your hyundai lantra does not work anymore: the different origins.

The bulb is defective . This is of course the most common reason. In all cases, you will need to remove the lighting unit from the hyundai lantra. To do this, you will need to follow the steps in the next section. To verify it is very easy. In case it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, you will have to check that the electricity is circulating properly using a voltmeter. Try to take the voltage on the two poles of the connector. An electrical problem . It is less common, however it can still happen on a hyundai lantra. It is possible that there is a short-juice, or that a connector is dirty. In this case, check the voltage at both poles. In the event that the electricity does not pass properly, the electric cables must be followed until the cause of the fault is found. It is also possible that the connectors are dirty. So, we will have to clean them with a specialized product and measure the voltage again.

How to replace the ceiling light bulb on your hyundai lantra

Now that you have found the cause of the failure, you are sure that the problem must come from the bulb. Let's see how to replace the ceiling light bulb point by point on a hyundai lantra.

  • Remove the ceiling lamp using a flat screwdriver. Insert it into the groove to pry.
  • Remove the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Of course, the size and the base must match
  • Place the new bulb carefully
  • Replace the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling lamp of your hyundai lantra should work normally. Enjoy the road.