Replacing the light bulb in a Hyundai Portico is an extremely manipulation simple to execute . No need to be a great handyman, it requires basic tools and no knowledge of mechanics. To do this, plan about 10 minutes . However before you start the work, you must make sure that the problem comes from the bulb. We will first discover how to know where the problem is coming from, and then how to replace the faulty bulb.change-bulb-ceiling-light-Hyundai-Portico

The bulb of the ceiling lamp of your Hyundai Portico does not work anymore: the different origins.

The bulb is defective . This is of course the most common reason. In all cases, you will have to remove the lighting unit from your Hyundai Portico. In order to do this, you have to follow the steps in the next part. To control it is extremely simple. If it is a filament bulb, you can visually check that the filament is broken. If, on the other hand, it is an LED bulb, you must check that the current flows properly thanks to a voltmeter. Try to take the voltage on both sides of the connector. An electrical concern . It is less common, however it can still happen on a Hyundai Portico. There may be a false contact, or a connector may be dirty. In this situation, inspect the tension at both poles. If the current does not flow properly, you must follow the wiring until you find the cause of the failure. The connectors may also be dirty. So, we will have to clean them with a specialized product and measure the tension again.

How to replace the ceiling light bulb on your Hyundai Portico

Once you have found the cause of the failure, you are sure that the problem comes from the bulb. We will see how to replace the light bulb step by step on a Hyundai Portico.

  • Remove the ceiling light with a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Disassemble the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Of course, the size and the base must match
  • Install the new bulb carefully
  • Replace the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. It's good, voila! The light bulb in your Hyundai Portico should work normally. Good walk.