Replacing the headlight bulb of a Hyundai Scoupe is an extremely easy to perform . No need to be a great mechanic, this repair requires basic tools and no mechanical knowledge. To do this, plan ten minutes . But before embarking on repairs, it is necessary to make sure that the malfunction is from the bulb. We will first of all find out how to know where the problem is coming from, and then how to replace the faulty bulb.change-bulb-Hyundai-Scoupe

The ceiling bulb of your Hyundai Scoupe no longer works: the different origins.

The bulb is defective . This is of course the most common cause. Whatever happens, you are going to have to remove the light unit from the Hyundai Scoupe. For this, it is necessary to follow the steps in the next part. To verify it is extremely easy. In case it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, it is necessary to check that the electricity is circulating correctly using a voltmeter. Remember to measure the voltage on the two poles of the connector. An electrical malfunction . It is less frequent, however it can still happen on this Hyundai Scoupe. There may be a short circuit, or a connector may be dirty. In this situation, examine the tension at both ends. In the event that the electricity does not pass correctly, you must follow the electrical cables until you can see the cause of the failure. The connectors may also be dirty. Then, it will be necessary to clean them with a specialized product and to re-measure the voltage.

How to replace the ceiling bulb of your Hyundai Scoupe

Now that you have found the cause of the failure, you are certain that the malfunction comes from the bulb. We will see how to replace the ceiling light bulb step by step on this Hyundai Scoupe.

  • Remove the ceiling lamp with a flat screwdriver. Insert it into the groove to pry.
  • Disconnect the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it with the new one. Of course, the size and the base must match
  • Carefully place the new bulb
  • Replace the connectors and the ceiling light in the other direction

You can now switch on the ignition and check that the bulb is working properly. And voila, it's done! The bulb in the ceiling light of your Hyundai Scoupe will work normally. Good walk.