Changing the light bulb of a hyundai tucson is an extremely manipulation simple to make . No need to be a great mechanic, it requires basic tools and no mechanical knowledge. To make this replacement, count ten minutes . However before launching into repairs, you will need to make sure that the problem comes from the bulb. We will first discover how to know where the problem originated, then how to change the burnt out bulb.change-bulb-ceiling-hyundai-tucson

The ceiling bulb of your hyundai tucson does not work any more: the different origins.

The bulb is defective . This is obviously the most common reason. In all cases, you will have to dismantle the lighting unit of your hyundai tucson. To do this, follow the steps in the next section. To control it is extremely simple. If ever it is a filament bulb, you can visually check that the filament is broken. If, on the other hand, it is an LED bulb, it will be necessary to check that the current flows properly using a voltmeter. Try to measure the voltage on the two poles of the connector. An electrical concern . It's less ordinary, but it can still happen on a hyundai tucson. It is possible that there is a false contact, or that a connector is dirty. In this situation, check the voltage at both poles. If the current does not pass properly, it will be necessary to follow the electric wires until you see the cause of the failure. It is also possible that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the tension.

How to replace the ceiling light bulb on your hyundai tucson

Now that you have found the cause of the failure, you are sure that the problem came from the bulb. We will see how to change the bulb of the ceiling light step by step on a hyundai tucson.

  • Remove the ceiling light using a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must match
  • Attach the new bulb carefully
  • Replace the connectors and the ceiling light in reverse order

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The light bulb in your hyundai tucson should work normally. Enjoy the road.