Replacing the headlight bulb of a Hyundai Veloster is a super operation simple to execute . You don't need to be an excellent mechanic, it requires basic tools and no knowledge of mechanics. To perform this operation, plan about 10 minutes . But before you start the work, you will have to make sure that the problem comes from the bulb. We will first see how to know where the problem came from, then how to change the burnt out bulb.
The ceiling light of your Hyundai Veloster no longer works: the different origins.
The bulb is defective . This is of course the most common reason. Whatever happens, you are going to have to remove the light unit from the Hyundai Veloster. In order to do this, you will have to follow the steps in the next paragraph. To control it is super simple. If it is ever a filament bulb, you can visually check that this filament is broken. If, on the other hand, it is an LED bulb, it will be necessary to check that the current flows correctly using a voltmeter. Try to measure the voltage on both sides of the connector. An electrical concern . It's less ordinary, but it can still happen on a Hyundai Veloster. It happens that there is a short juice, or that a connector is dirty. In this situation, check the voltage at both poles. If the current does not flow properly, you must follow the electric cables until you find the source of the failure. It also happens that the connectors are dirty. In this case, it will be necessary to clean them with a specialized product and to re-measure the voltage.
How to replace the ceiling bulb of your Hyundai Veloster
Once you have found the source of the failure, you are sure the problem is with the bulb. We will see how to change the bulb of the ceiling light step by step on a Hyundai Veloster.
- Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
- Disconnect the connector
- Disassemble the ceiling light to access the bulb
- Remove the bulb and compare it with the new one. It is of course necessary that the size and the base are identical
- Attach the new bulb gently
- Replace the connectors and the ceiling light in reverse order
You can now switch on the ignition and check that the bulb is working properly. And now, voila ! The ceiling bulb of your Hyundai Veloster must work normally. Good walk.