Changing the light bulb of an iveco daily is an extremely repair simple to make . There is no need to be an excellent handyman, this repair requires basic tools and no mechanical knowledge. To carry out this replacement, plan about 10 minutes . However, before starting the work, you must make sure that the problem must come from the bulb. We will first find out how to find out where the problem is coming from, and then how to replace the burnt out bulb.change-light-bulb-ceiling-iveco-daily

The overhead lighting of your iveco daily no longer works: the different causes.

The bulb is defective . This is of course the most common cause. Whatever happens, you will need to disassemble the light block from the iveco daily. To do this, follow the steps in the next section. To control it is extremely simple. If it is ever a filament bulb, you can visually check that its filament is broken. If on the other hand it is an LED bulb, you must check that the electricity is flowing correctly using a voltmeter. Try to take the voltage on both sides of the connector. An electrical problem . It is less common, however it can still happen on this iveco daily. It happens that there is a false contact, or that a connector is dirty. In this situation, inspect the tension at both ends. If the electricity does not pass correctly, you must follow the wiring until you perceive the source of the failure. It also happens that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the voltage again.

How to replace the ceiling light bulb on your iveco daily

Now that you have found the source of the fault, you are sure that the problem must come from the bulb. We will see how to replace the ceiling light bulb step by step on this iveco daily.

  • Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to access the bulb
  • Remove the bulb and compare it with the new one. Of course, the size and the base must match
  • Carefully place the new bulb
  • Reposition the connectors and the ceiling light in the other direction

You can now turn on the ignition and check that the bulb is working properly. And now, voila ! The ceiling lamp of your iveco daily should work normally. Good road.