Changing the bulb of the ceiling lamp of an Iveco Massif is an extremely repair easy to make . No need to be a great mechanic, it requires basic tools and no knowledge of mechanics. To carry out this replacement, count ten minutes . However before starting the work, you will have to make sure that the problem comes from the bulb. We will first find out how to find out where the problem came from, then how to replace the faulty bulb.change-bulb-ceiling-Iveco-Massif

The ceiling bulb of your Iveco Massif does not work anymore: the different causes.

The bulb is defective . This is obviously the most common cause. Whatever happens, you will have to dismantle the lighting unit of the Iveco Massif. To do this, you will have to follow the steps in the next part. To control it is extremely easy. If it is a filament bulb, you can visually check that the filament is broken. If on the other hand it is an LED bulb, it will be necessary to check that the electricity circulates correctly using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical concern . It's less ordinary, but it can still happen on this Iveco Massif. It happens that there is a short-juice, or that a connector is dirty. In this case, inspect the voltage at both ends. If the electricity does not pass correctly, you will have to follow the electric cables until you find the source of the failure. It also happens that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the tension again.

How to replace the light bulb on your Iveco Massif

Once you have found the source of the failure, you can be sure that the problem comes from the bulb. We will see how to replace the ceiling light bulb point by point on this Iveco Massif.

  • Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously the size and the base must be identical
  • Attach the new bulb carefully
  • Reposition the connectors and the ceiling light in the other direction

You can now switch on the ignition and check that the bulb is working properly. It's good, voila! The ceiling bulb of your Iveco Massif should work normally. Good walk.