Changing the ceiling light bulb on a Kia Pop is an extremely manipulation easy to perform . There is no need to be a great mechanic, it requires basic tools and no mechanical knowledge. To carry out this replacement, plan about 10 minutes . However before starting the work, you will have to make sure that the malfunction comes from the bulb. We will first see how to know where the malfunction comes from, then how to replace the defective bulb.change-bulb-ceiling-light-Kia-Pop

The ceiling lighting of your Kia Pop does not work any more: the different reasons.

The bulb is defective . This is obviously the most common cause. Whatever happens, you will need to remove the light unit from your Kia Pop. To do this, you will have to follow the steps in the next section. To verify it is extremely easy. When it is a filament bulb, you can visually check that its filament is broken. When, on the other hand, it is an LED bulb, it will be necessary to check that the electricity is circulating properly thanks to a voltmeter. Remember to take the voltage on the two poles of the connector. An electrical malfunction . It's less common, however it can still happen on a Kia Pop. It happens that there is a short circuit, or that a connector is dirty. In this case, check the voltage at the two poles. When the electricity does not pass properly, you must follow the wiring until you find the source of the fault. It also happens that the connectors are dirty. Then, it will be necessary to clean them thanks to a specialized product and measure the voltage again.

How to replace the light bulb on your Kia Pop

Once you have found the source of the failure, you are certain that the malfunction comes from the bulb. We will see how to replace the ceiling light bulb point by point on a Kia Pop.

  • Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously, the size and the base must match
  • Install the new bulb carefully
  • Replace the connectors and the ceiling light in reverse order

You can now turn on the ignition and check that the bulb is working properly. And now, voila ! The ceiling lamp of your Kia Pop should work normally. Good walk.