Changing the ceiling light bulb on a Kia Sephia is a super operation simple to make . No need to be an excellent mechanic, it requires few tools and no mechanical knowledge. To make this replacement, count ten minutes . But before launching into repairs, you will have to make sure that the malfunction comes from the bulb. We will see first how to know where the malfunction came from, then how to change the damaged bulb.change-bulb-ceiling-light-Kia-Sephia

The ceiling bulb of your Kia Sephia does not work anymore: the different causes.

The bulb is defective . This is of course the most common cause. In all cases, you will need to remove the light unit from the Kia Sephia. To do this, you will have to follow the steps in the following paragraph. To control it it's super simple. In case it is a filament bulb, you can visually check that its filament is broken. In the case where on the other hand it is an LED bulb, it will be necessary to check that the electricity circulates correctly thanks to a voltmeter. Try to measure the voltage on the two poles of the connector. An electrical malfunction . It's less common, but it can still happen on a Kia Sephia. Sometimes there is a short circuit, or a connector is dirty. In this case, inspect the tension at both poles. In the event that the electricity does not pass correctly, you will have to follow the electric wires until you find the origin of the failure. It also happens that the connectors are dirty. Then, it will be necessary to clean them thanks to specialized product and to measure the tension.

How to replace the light bulb on your Kia Sephia

Once you have found the cause of the failure, you are certain that the malfunction originated in the bulb. We will see how to change the bulb of the ceiling light step by step on a Kia Sephia.

  • Remove the ceiling light with a flat screwdriver. Pass it in the groove to leverage.
  • Remove the connector
  • Disassemble the ceiling light to access the bulb
  • Remove the bulb and compare it to the new one. It is of course necessary that the dimensions and the base are identical
  • Place the new bulb gently
  • Reposition the connectors and the ceiling light in the opposite direction

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling lamp of your Kia Sephia will operate normally. Good walk.