Replace the light bulb of a Kiaage 2 is a very repair easy to perform . There is no need to be a great handyman, it requires few tools and no knowledge of mechanics. To make this replacement, plan about 10 minutes . But before you start the repairs, you need to make sure that the problem came from the bulb. We will first find out how to find out where the problem came from, and then how to replace the damaged bulb.change-bulb-ceiling-lamp-Kiaage-2

The ceiling lighting of your Kiaage 2 does not work anymore: the different origins.

The bulb is defective . This is of course the most common cause. Whatever happens, you will have to dismantle the Kiaage 2 light unit. To do this, you must follow the steps in the next paragraph. To control it is very easy. In case it is a filament bulb, you can visually check that its filament is broken. However, if it is an LED bulb, you must check that the electricity is flowing correctly using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical problem . It's less common, but it can still happen on this Kiaage 2. It happens that there is a false contact, or that a connector is dirty. In this situation, check the voltage at both poles. In the event that the electricity does not pass correctly, the wiring must be followed until the cause of the failure is found. It also happens that the connectors are dirty. In this case, they must be cleaned with a specialized product and the voltage measured.

How to replace the ceiling light bulb on your Kiaage 2

Now that you have found the cause of the failure, you are certain that the problem originated from the bulb. We will see how to replace the ceiling light bulb step by step on this Kiaage 2.

  • Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. It is of course necessary that the size and the base are identical
  • Attach the new bulb gently
  • Replace the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. It's good, it's done! The ceiling lamp of your Kiaage 2 should work normally. Good road.