Replacing the light bulb of a Kiaage ceiling light is an extremely easy to make . No need to be a great handyman, it requires basic tools and no mechanical knowledge. To make this replacement, plan ten minutes . However, before starting the repairs, you must make sure that the problem must come from the bulb. We will find out first of all how to know where the problem must come from, then how to change the faulty bulb.change-bulb-ceiling-lamp-Kiaage

The lighting in the ceiling of your Kiaage no longer works: the different origins.

The bulb is defective . This is obviously the most common reason. Whatever happens, you will have to remove the light unit from your Kiaage. In order to do this, you will have to follow the steps in the next paragraph. To control it is extremely easy. In case it is a filament bulb, you can visually check that this filament is broken. In the case where on the other hand it is an LED bulb, it will be necessary to check that the current flows properly using a voltmeter. Try to measure the voltage on both sides of the connector. An electrical problem . It's less common, however it can still happen on a Kiaage. There may be a short juice, or a connector may be dirty. In this situation, inspect the tension at both ends. In the event that the current does not pass properly, the electrical wires must be followed until the source of the fault is found. The connectors may also be dirty. Then, you will have to clean them with a specialized product and measure the tension again.

How to replace the light bulb on your Kiaage

Now that you have found the source of the fault, you are sure that the problem must come from the bulb. We will see how to change the bulb of the ceiling light point by point on a Kiaage.

  • Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
  • Disconnect the connector
  • Disassemble the ceiling light to access the bulb
  • Remove the bulb and compare it to the new one. Obviously the size and the base must be identical
  • Carefully place the new bulb
  • Reposition the connectors and the ceiling light in the opposite direction

You can now switch on the ignition and check that the bulb is working properly. And now, voila ! Your Kiaage's ceiling light bulb will operate normally. Good walk.