Replacing the headlight bulb of a Renault Kangoo 2 is a very operation easy to execute . You don't need to be an excellent mechanic, this repair requires few tools and no mechanical knowledge. To carry out this replacement, plan about 10 minutes . But before starting work, it is necessary to make sure that the problem should come from the bulb. We will first find out how to find out where the problem must be, and then how to replace the damaged bulb.change-bulb-ceiling-Renault-Kangoo-2

The ceiling lighting of your Renault Kangoo 2 no longer works: the different origins.

The bulb is defective . This is of course the most common cause. Whatever happens, you will have to disassemble the lighting unit from your Renault Kangoo 2. To do this, you must follow the steps in the following paragraph. To control it is very easy. If it is ever a filament bulb, you can visually check that this filament is broken. If, on the other hand, it is an LED bulb, it is necessary to check that the electricity is circulating properly thanks to a voltmeter. Try to take the voltage on the two connector poles. An electrical problem . It is less common, however it can still happen on this Renault Kangoo 2. It is possible that there is a short circuit, or that a connector is dirty. In this situation, inspect the tension at both ends. If the electricity does not pass properly, you will have to follow the electrical wires until you see the cause of the failure. It is also possible that the connectors are dirty. In this case, it will be necessary to clean them with a specialized product and measure the tension again.

How to replace the ceiling bulb of your Renault Kangoo 2

Now that you have found the cause of the failure, you are sure that the problem must come from the bulb. Let's see how to replace the light bulb point by point on this Renault Kangoo 2.

  • Remove the ceiling lamp with a flat screwdriver. Insert it into the groove to pry.
  • Disconnect the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Of course, the size and the base must be identical
  • Attach the new bulb gently
  • Reposition the connectors and the dome following the reverse procedure

You can now switch on the ignition and check that the bulb is working as it should. And now, voila ! The ceiling bulb of your Renault Kangoo 2 should work normally. Good walk.