Changing the light bulb in a Seat 128 is a super manipulation easy to make . No need to be an excellent mechanic, it requires basic tools and no mechanical knowledge. To make this replacement, plan ten minutes . However before you start the work, it is necessary to make sure that the problem comes from the bulb. We will first see how to know where the problem originated, then how to change the burnt out bulb.change-bulb-ceiling-lamp-Seat-128

The bulb of the ceiling lamp in your Seat 128 does not work anymore: the different origins.

The bulb is defective . This is of course the most common cause. Whatever happens, you will need to remove the lighting unit from your Seat 128. To do this, you must follow the steps in the next paragraph. To control it is super easy. In case it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, it is necessary to check that the electricity is flowing properly using a voltmeter. Remember to measure the voltage on the two poles of the connector. An electrical concern . It's less common, but it can still happen on this Seat 128. It is possible that there is a false contact, or that a connector is dirty. In this situation, check the voltage at both poles. In the event that the electricity does not pass properly, you will have to follow the electric cables until you find the cause of the failure. It is also possible that the connectors are dirty. So, you will have to clean them with a specialized product and measure the tension.

How to replace the ceiling light bulb on your Seat 128

Once you have found the cause of the failure, you are certain that the problem came from the bulb. We will see how to change the bulb of the ceiling light step by step on this Seat 128.

  • Remove the ceiling light with a flat screwdriver. Pass it in the groove to make a lever.
  • Disconnect the connector
  • Disassemble the ceiling light to have access to the bulb
  • Remove the bulb and compare it to the new one. Of course, the size and the base must be identical
  • Place the new bulb carefully
  • Replace the connectors and the ceiling light in the opposite direction

You can now turn on the ignition and check that the bulb is working properly. It's good, it's done! The bulb of the ceiling lamp of your Seat 128 should work normally. Enjoy the road.