Replace the light bulb of a seat alhambra ceiling light is a very manipulation simple to execute . No need to be a great handyman, it requires few tools and no mechanical knowledge. To do this, plan ten minutes . However before starting the work, you will have to make sure that the problem comes from the bulb. We will first see how to find out where the problem came from, then how to replace the burnt out bulb.
The lighting in the ceiling light of your seat alhambra no longer works: the different origins.
The bulb is defective . This is of course the most common cause. Whatever happens, you will have to remove the lighting unit from your seat alhambra. To do this, you will have to follow the steps in the next part. To verify it is very simple. When it is a filament bulb, you can visually check that its filament is broken. When, on the other hand, it is an LED bulb, it will be necessary to check that the current flows correctly using a voltmeter. Remember to take the voltage on both sides of the connector. An electrical concern . It's less common, but it can still happen on this seat alhambra. It happens that there is a short-juice, or that a connector is dirty. In this case, check the voltage at both ends. When the current does not flow correctly, you will have to follow the wiring until you perceive the cause of the failure. It also happens that the connectors are dirty. In this case, it will be necessary to clean them using a specialized product and measure the tension.
How to replace the bulb in the ceiling light of your seat alhambra
Now that you have found the cause of the failure, you are sure that the problem came from the bulb. We will see how to replace the ceiling light bulb step by step on this seat alhambra.
- Remove the ceiling light using a flat screwdriver. Introduce it into the groove to make a lever.
- Remove the connector
- Disassemble the ceiling light to access the bulb
- Remove the bulb and compare it to the new one. Naturally, the dimensions and the base must be identical
- Place the new bulb carefully
- Replace the connectors and the dome following the reverse procedure
You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The bulb of the ceiling light of your seat alhambra will work normally. Enjoy the road.