Replacing the light bulb in a Seat Arona is an extremely repair easy to execute . There is no need to be a great mechanic, this repair requires few tools and no knowledge of mechanics. To carry out this operation, plan about 10 minutes . However, before you get started, make sure the problem comes from the bulb. We will first see how to find out where the problem is coming from, then how to change the defective bulb.change-bulb-ceiling-lamp-Seat-Arona

The bulb of the ceiling lamp of your Seat Arona does not work anymore: the different causes.

The bulb is defective . This is of course the most common reason. In all cases, you will have to dismantle the lighting unit of your Seat Arona. In order to do this, you have to follow the steps in the next part. To control it is extremely easy. If it is ever a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, you must check that the current flows properly thanks to a voltmeter. Try to take the voltage on the two poles of the connector. An electrical problem . It's less common, but it can still happen on this Seat Arona. It is possible that there is a short-juice, or that a connector is dirty. In this case, examine the voltage at the two poles. If the current does not pass properly, you will have to follow the electric wires until you find the cause of the failure. It is also possible that the connectors are dirty. So, we will have to clean them with a specialized product and measure the voltage again.

How to replace the light bulb on your Seat Arona

Now that you have found the cause of the failure, you can be sure that the problem is with the bulb. We will see how to change the bulb of the ceiling light step by step on this Seat Arona.

  • Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Disassemble the ceiling light to access the bulb
  • Remove the bulb and compare it to the new one. Of course, the size and the base must match
  • Carefully place the new bulb
  • Reposition the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The bulb of the ceiling lamp of your Seat Arona will operate normally. Good road.