Changing the light bulb in a Seat Mii is a very repair simple to execute . No need to be an excellent handyman, this repair requires few tools and no knowledge of mechanics. To make this replacement, plan about 10 minutes . However before you start repairing, you must make sure that the problem comes from the bulb. We will first find out how to find out where the problem is coming from, then how to change the damaged bulb.change-bulb-ceiling-lamp-Seat-Mii

The lighting on the ceiling of your Seat Mii no longer works: the different origins.

The bulb is defective . This is of course the most common cause. In any case, you will have to remove the light unit from the Seat Mii. To do this, follow the steps in the next paragraph. To control it is very simple. If ever it is a filament bulb, you can visually check that the filament is broken. If, on the other hand, it is an LED bulb, you must check that the electricity flows correctly using a voltmeter. Try to measure the voltage on both sides of the connector. An electrical problem . It's less ordinary, however it can still happen on this Seat Mii. Sometimes there is a short circuit, or a connector is dirty. In this situation, inspect the tension at both poles. If the electricity does not pass correctly, you will have to follow the electric cables until you find the cause of the failure. It also happens that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the voltage again.

How to replace the light bulb on your Seat Mii

Now that you have found the cause of the failure, you are sure that the problem is with the bulb. We will see how to change the bulb of the ceiling light step by step on this Seat Mii.

  • Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
  • Disconnect the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Naturally, the size and the base must be identical
  • Attach the new bulb gently
  • Reposition the connectors and the ceiling light in the opposite direction

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The bulb of the ceiling lamp of your Seat Mii will operate normally. Good road.