Changing the bulb of the ceiling light of a Suzuki Grand Vitara 2 is a super repair simple to make . No need to be an excellent handyman, this repair requires few tools and no knowledge of mechanics. To make this replacement, plan ten minutes . But before you start repairs, you will need to make sure that the problem is with the bulb. We will first see how to find out where the problem is coming from, and then how to replace the burnt out bulb.replacement-bulb-Suzuki-Grand-Vitara-2

The ceiling lighting of your Suzuki Grand Vitara 2 no longer works: various causes.

The bulb is defective . This is of course the most common cause. Whatever happens, you will have to disassemble the lighting unit of the Suzuki Grand Vitara 2. To do so, you will have to follow the steps in the next part. To check it is super simple. When it is a filament bulb, you can visually check that this filament is broken. When on the other hand it is an LED bulb, it will be necessary to check that the current flows correctly using a voltmeter. Try to measure the voltage on the two poles of the connector. An electrical problem . This is less common, however it can still happen on a Suzuki Grand Vitara 2. It happens that there is a bad contact, or a connector is dirty. In this case, check the voltage at both poles. When the current does not flow properly, you will have to follow the wiring until you can see the cause of the failure. It also happens that the connectors are dirty. So, you will have to clean them with a specialized product and measure the tension again.

How to replace the ceiling bulb of your Suzuki Grand Vitara 2

Now that you have found the cause of the failure, you are sure the problem is with the bulb. We will see how to replace the bulb of the ceiling light point by point on a Suzuki Grand Vitara 2.

  • Remove the ceiling light using a flat screwdriver. Insert it into the groove to pry.
  • Disconnect the connector
  • Disassemble the ceiling light to access the bulb
  • Remove the bulb and compare it to the new one. Naturally, the size and the base must match
  • Place the new bulb gently
  • Replace the connectors and the dome following the reverse procedure

You can now turn on the ignition and check that the bulb is working properly. It's good it's done ! The ceiling bulb of your Suzuki Grand Vitara 2 must work normally. Enjoy the road.