Replacing the ceiling bulb of a Suzuki Swift 2 is a very operation simple to make . There is no need to be an excellent mechanic, it requires few tools and no mechanical knowledge. To do this, count ten minutes . However, before embarking on repairs, it is necessary to make sure that the malfunction is from the bulb. We will first see how to know where the problem came from, then how to replace the damaged bulb.change-bulb-ceiling-Suzuki-Swift-2

The ceiling lighting of your Suzuki Swift 2 no longer works: various reasons.

The bulb is defective . This is naturally the most common cause. Whatever happens, you will have to disassemble the light unit from your Suzuki Swift 2. To do so, you must follow the steps in the following paragraph. To check it is very simple. If it is ever a filament bulb, you can visually check that this filament is broken. If, on the other hand, it is an LED bulb, it is necessary to check that the current is flowing correctly using a voltmeter. Try to measure the voltage on the two connector poles. An electrical malfunction . It's less ordinary, but it can still happen on a Suzuki Swift 2. There may be a bad contact, or a connector may be dirty. In this situation, inspect the voltage at both poles. If the current does not flow correctly, it will be necessary to follow the wiring until the cause of the failure is found. It is also possible that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the tension again.

How to replace the ceiling bulb of your Suzuki Swift 2

Now that you have found the cause of the fault, you are sure that the fault is with the bulb. We will see how to replace the ceiling light bulb step by step on a Suzuki Swift 2.

  • Remove the ceiling light using a flat screwdriver. Pass it in the groove to make a lever.
  • Disconnect the connector
  • Dismount the ceiling light so as to access the bulb
  • Remove the bulb and compare it to the new one. Naturally, the size and the base must match
  • Place the new bulb gently
  • Replace the connectors and the ceiling light in reverse order

You can now turn on the ignition and check that the bulb is working properly. And now, voila ! The ceiling bulb of your Suzuki Swift 2 will work normally. Good walk.