Replacing the ceiling bulb of a Suzuki Swift 3 is an extremely manipulation simple to make . No need to be a great mechanic, this repair requires basic tools and no knowledge of mechanics. To carry out this replacement, plan about 10 minutes . However, before starting the work, you will have to make sure that the problem is with the bulb. We will first see how to find out where the problem comes from, then how to change the damaged bulb.
The ceiling lighting of your Suzuki Swift 3 no longer works: the different origins.
The bulb is defective . This is of course the most common reason. In any case, you will have to remove the lighting unit from the Suzuki Swift 3. For this, you will have to follow the steps in the next part. To check it is extremely simple. In case it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, you will have to check that the electricity is circulating correctly using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical malfunction . It is less common, but it can still happen on a Suzuki Swift 3. It happens that there is a bad contact, or that a connector is dirty. In this case, examine the tension at both ends. In the event that the electricity does not pass properly, you must follow the electrical cables until you perceive the source of the failure. It also happens that the connectors are dirty. In this case, you will have to clean them using a specialized product and measure the voltage again.
How to replace the ceiling bulb of your Suzuki Swift 3
Now that you have found the source of the failure, you are certain that the malfunction comes from the bulb. We will see how to change the ceiling light bulb point by point on a Suzuki Swift 3.
- Remove the ceiling light using a flat screwdriver. Insert it into the groove to pry.
- Remove the connector
- Dismount the ceiling light in order to have access to the bulb
- Remove the bulb and compare it to the new one. Of course, the size and the base must be identical
- Install the new bulb carefully
- Replace the connectors and the ceiling light in the other direction
You can now switch on the ignition and check that the bulb is working properly. And now, voila ! The ceiling bulb of your Suzuki Swift 3 will work normally. Good walk.