Changing the bulb of the ceiling light of a Suzuki Swift 4 is a super manipulation easy to perform . No need to be a great mechanic, it requires basic tools and no mechanical knowledge. To make this replacement, count about 10 minutes . However, before starting the repairs, it is necessary to make sure that the malfunction is from the bulb. We will first see how to find out where the problem came from, then how to replace the burnt out bulb.
The ceiling bulb of your Suzuki Swift 4 no longer works: the different origins.
The bulb is defective . This is naturally the most common cause. In any case, you will have to remove the light unit from your Suzuki Swift 4. To do so, you must follow the steps in the next part. To control it is super easy. When it is a filament bulb, you can visually check that its filament is broken. When on the other hand it is an LED bulb, it is necessary to check that the electricity is circulating properly using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical malfunction . It's less ordinary, however it can still happen on this Suzuki Swift 4. It happens that there is a short circuit, or a connector is dirty. In this situation, inspect the tension at both ends. When the electricity does not pass properly, you must follow the wiring until you find the source of the fault. It also happens that the connectors are dirty. In this case, it will be necessary to clean them using a specialized product and measure the voltage again.
How to replace the ceiling bulb of your Suzuki Swift 4
Now that you have found the source of the fault, you are sure that the fault is with the bulb. We will see how to replace the bulb of the ceiling light step by step on this Suzuki Swift 4.
- Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
- Disconnect the connector
- Disassemble the ceiling light so as to have access to the bulb
- Remove the bulb and compare it to the new one. Naturally, the dimensions and the base must be identical
- Attach the new bulb gently
- Replace the connectors and the dome following the reverse procedure
You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling bulb of your Suzuki Swift 4 should work normally. Good road.