Replacing the ceiling bulb of a Suzuki Sx4 S-cross is an extremely repair simple to perform . There is no need to be an excellent mechanic, this repair requires basic tools and no mechanical knowledge. To carry out this replacement, plan about 10 minutes . However, before starting the repairs, it is necessary to make sure that the malfunction comes from the bulb. We will first see how to find out where the problem is coming from, and then how to change the burnt out bulb.
The ceiling light of your Suzuki Sx4 S-cross no longer works: various causes.
The bulb is defective . This is naturally the most common cause. No matter what, you will have to remove the light assembly from the Suzuki Sx4 S-cross. In order to do this, it is necessary to follow the steps in the next part. To control it is extremely simple. If it is a filament bulb, you can visually check that this filament is broken. If, on the other hand, it is an LED bulb, it is necessary to check that the current flows properly thanks to a voltmeter. Try to measure the voltage on both sides of the connector. An electrical malfunction . It's less ordinary, but it can still happen on this Suzuki Sx4 S-cross. It happens that there is a short circuit, or a connector is dirty. In this case, inspect the voltage at both ends. If the current does not flow properly, you must follow the electrical cables until you can see the source of the fault. It also happens that the connectors are dirty. In this case, you will have to clean them using a specialized product and re-measure the tension.
How to replace the ceiling bulb of your Suzuki Sx4 S-cross
Now that you have found the source of the fault, you are sure that the fault comes from the bulb. Let's see how to change the ceiling light bulb step by step on this Suzuki Sx4 S-cross.
- Remove the ceiling lamp with a flat screwdriver. Insert it into the groove to pry.
- Remove the connector
- Disassemble the ceiling light so as to have access to the bulb
- Remove the bulb and compare it to the new one. Naturally, the dimensions and the base must be identical
- Install the new bulb carefully
- Replace the connectors and the ceiling light in the opposite direction
You can now switch on the ignition and check that the bulb is working correctly. And voila, it's done! The bulb of the ceiling light of your Suzuki Sx4 S-cross will work normally. Enjoy the road.