Changing the bulb of the ceiling light of a Toyota 2000 Gt Mf 12 is an extremely manipulation easy to make . There is no need to be an excellent handyman, this repair requires few tools and no mechanical knowledge. To carry out this replacement, plan about 10 minutes . However, before you start the repairs, you will have to make sure that the malfunction must come from the bulb. We will first see how to find out where the malfunction must come from, then how to replace the faulty bulb.change-bulb-ceiling-Toyota-2000-Gt-Mf-12

The ceiling lighting of your Toyota 2000 Gt Mf 12 no longer works: the different origins.

The bulb is defective . This is obviously the most common reason. In any case, you will have to remove the light unit from your Toyota 2000 Gt Mf 12. In order to do this, you will have to follow the steps in the next part. To verify it is extremely easy. When it is a filament bulb, you can visually check that its filament is broken. When on the other hand it is an LED bulb, it will be necessary to check that the current flows properly using a voltmeter. Remember to measure the voltage on the two poles of the connector. An electrical malfunction . It is less common, but it can still happen on a Toyota 2000 Gt Mf 12. It happens that there is a bad contact, or that a connector is dirty. In this case, check the voltage at both poles. When the current is not flowing properly, you must follow the electrical wires until you can see the cause of the failure. It also happens that the connectors are dirty. In this case, you will have to clean them using a specialized product and measure the voltage again.

How to replace the ceiling bulb of your Toyota 2000 Gt Mf 12

Now that you have found the cause of the fault, you are certain that the problem must be with the bulb. We will see how to replace the bulb of the ceiling light step by step on a Toyota 2000 Gt Mf 12.

  • Remove the ceiling lamp using a flat screwdriver. Insert it into the groove to pry.
  • Remove the connector
  • Disassemble the ceiling light so as to access the bulb
  • Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must be identical
  • Install the new bulb carefully
  • Reposition the connectors and the ceiling light in the opposite direction

You can now switch on the ignition and check that the bulb is working properly. And voila, it's done! The interior light bulb of your Toyota 2000 Gt Mf 12 should work normally. Enjoy the road.