Replacing the light bulb in a Toyota Auris 2 is a super operation easy to execute . There is no need to be an excellent handyman, it requires few tools and no knowledge of mechanics. To make this replacement, count ten minutes . However before you start the work, you will have to make sure that the problem comes from the bulb. We will find out first how to find out where the problem is coming from, then how to replace the faulty bulb.
The interior lighting of your Toyota Auris 2 no longer works: the different causes.
The bulb is defective . This is of course the most common cause. Whatever happens, you will have to remove the lighting unit from the Toyota Auris 2. To do this, you will have to follow the steps in the next part. To control it is super easy. In case it is a filament bulb, you can visually check that this filament is broken. In the case where on the other hand it is an LED bulb, it will be necessary to check that the current circulates correctly thanks to a voltmeter. Try to take the tension on the two poles of the connector. An electrical problem . It is less common, however it can still happen on a Toyota Auris 2. It happens that there is a false contact, or that a connector is dirty. In this case, check the voltage at both poles. In the event that the current does not flow correctly, the wiring must be followed until the source of the fault is found. It also happens that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the voltage again.
How to replace the light bulb on your Toyota Auris 2
Now that you have found the cause of the failure, you are certain that the problem comes from the bulb. Let's see how to replace the light bulb step by step on a Toyota Auris 2.
- Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
- Remove the connector
- Dismount the ceiling light so as to access the bulb
- Remove the bulb and compare it with the new one. It is of course necessary that the dimensions and the base are identical
- Carefully place the new bulb
- Reposition the connectors and the ceiling light in the opposite direction
You can now turn on the ignition and check that the bulb is working properly. And now, voila ! The light bulb of your Toyota Auris 2 will work normally. Enjoy the road.