Changing the light bulb of a Toyota Auris is a very operation easy to perform . No need to be an excellent mechanic, it requires basic tools and no mechanical knowledge. To make this replacement, plan about 10 minutes . But before you start repairing, you will have to make sure that the problem must come from the bulb. We will see at first how to know where the problem must come from, then how to replace the defective bulb.change-bulb-ceiling-Toyota-Auris

The ceiling bulb of your Toyota Auris does not work anymore: the different origins.

The bulb is defective . This is obviously the most common reason. Whatever happens, you will need to remove the light block from the Toyota Auris. To do this, you will have to follow the steps in the next section. To verify it is very easy. If it is ever a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, you will have to check that the current flows correctly using a voltmeter. Try to measure the voltage on the two poles of the connector. An electrical problem . It is less common, however it can still happen on this Toyota Auris. It happens that there is a false contact, or that a connector is dirty. In this case, examine the voltage at the two poles. If the current does not flow correctly, the electric cables must be followed until the cause of the fault is perceived. It also happens that the connectors are dirty. So, we will have to clean them with a specialized product and measure the tension.

How to replace the light bulb on your Toyota Auris

Now that you have found the cause of the failure, you are sure that the problem must come from the bulb. We will see how to replace the light bulb point by point on this Toyota Auris.

  • Remove the ceiling light with a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to access the bulb
  • Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must be identical
  • Attach the new bulb gently
  • Replace the connectors and the ceiling light in the other direction

You can now turn on the ignition and check that the bulb is working properly. It's good, it's done! The ceiling lamp of your Toyota Auris should work normally. Good walk.