Replacing the light bulb in a Toyota Corolla Verso is a very operation easy to execute . There is no need to be a great handyman, this repair requires basic tools and no mechanical knowledge. To carry out this operation, plan ten minutes . However before launching into repairs, you will have to make sure that the problem comes from the bulb. We will first find out how to find out where the problem came from, then how to change the faulty bulb.
The ceiling bulb of your Toyota Corolla Verso does not work anymore: the different reasons.
The bulb is defective . This is of course the most common cause. In all cases, you will have to dismantle the lighting unit of your Toyota Corolla Verso. To do this, you will have to follow the steps in the next part. To verify it is very easy. When it is a filament bulb, you can visually check that the filament is broken. When, on the other hand, it is an LED bulb, it will be necessary to check that the electricity is circulating properly by using a voltmeter. Remember to take the voltage on both sides of the connector. An electrical problem . It's less common, but it can still happen on a Toyota Corolla Verso. There may be a short juice, or a connector may be dirty. In this situation, check the voltage at both ends. When the electricity does not pass properly, you will have to follow the wiring until you find the cause of the failure. The connectors may also be dirty. In this case, it will be necessary to clean them using a specialized product and measure the voltage.
How to replace the ceiling light bulb on your Toyota Corolla Verso
Once you have found the cause of the failure, you are certain that the problem originated from the bulb. We will see how to change the bulb of the ceiling light step by step on a Toyota Corolla Verso.
- Remove the ceiling light using a flat screwdriver. Introduce it into the groove to make a lever.
- Remove the connector
- Dismount the ceiling light so as to access the bulb
- Remove the bulb and compare it to the new one. It is of course necessary that the dimensions and the base correspond
- Attach the new bulb gently
- Replace the connectors and the dome following the reverse procedure
You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling lamp of your Toyota Corolla Verso should work normally. Good walk.