Changing the light bulb in a Toyota Corona is a super repair easy to execute . No need to be a great mechanic, it requires basic tools and no mechanical knowledge. To carry out this replacement, plan about 10 minutes . However, before starting the work, you must make sure that the problem comes from the bulb. We will first see how to know where the problem is coming from, then how to replace the burnt out bulb.change-bulb-ceiling-Toyota-Corona

The ceiling lighting of your Toyota Corona does not work anymore: the different reasons.

The bulb is defective . This is of course the most common cause. Whatever happens, you will have to dismantle the lighting unit of your Toyota Corona. To do this, follow the steps in the next paragraph. To control it is super easy. When it is a filament bulb, you can visually check that the filament is broken. When, on the other hand, it is an LED bulb, it will be necessary to check that the current flows properly by using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical problem . It is less common, however it can still happen on this Toyota Corona. It is possible that there is a false contact, or that a connector is dirty. In this situation, check the voltage at both poles. When the current does not pass properly, you must follow the wiring until you perceive the cause of the failure. It is also possible that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the voltage.

How to replace the light bulb on your Toyota Corona

Once you have found the cause of the failure, you are sure that the problem comes from the bulb. We will see how to replace the ceiling light bulb point by point on this Toyota Corona.

  • Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Of course, the size and the base must match
  • Place the new bulb carefully
  • Replace the connectors and the ceiling light in the other direction

You can now turn on the ignition and check that the bulb is working properly. And now, voila ! The ceiling lamp of your Toyota Corona should work normally. Enjoy the road.