Changing the light bulb of a Toyota Fine-n is a very operation easy to execute . No need to be an excellent mechanic, this repair requires basic tools and no mechanical knowledge. To do this, count ten minutes . But before starting the repairs, you will need to make sure that the problem comes from the bulb. We will see first how to know where the problem came from, then how to change the burnt out bulb.change-bulb-ceiling-Toyota-Fine-n

The interior lighting of your Toyota Fine-n no longer works: the different origins.

The bulb is defective . This is of course the most common reason. In all cases, you will need to remove the light unit from the Toyota Fine-n. To do this, you will need to follow the steps in the next section. To verify it is very easy. If it is ever a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, it will be necessary to check that the electricity circulates properly thanks to a voltmeter. Try to measure the voltage on both sides of the connector. An electrical concern . It's less ordinary, however it can still happen on this Toyota Fine-n. It happens that there is a short-juice, or that a connector is dirty. In this case, inspect the tension at both ends. If the electricity does not pass properly, it will be necessary to follow the electric wires until you see the cause of the failure. It also happens that the connectors are dirty. Then, it will be necessary to clean them thanks to a specialized product and to measure the tension again.

How to replace the ceiling light bulb on your Toyota Fine-n

Now that you have found the cause of the failure, you are certain that the problem came from the bulb. We will see how to change the ceiling light bulb step by step on this Toyota Fine-n.

  • Remove the ceiling light with a flat screwdriver. Pass it in the groove to make a lever.
  • Disconnect the connector
  • Disassemble the ceiling light to access the bulb
  • Remove the bulb and compare it to the new one. It is of course necessary that the dimensions and the base are identical
  • Attach the new bulb carefully
  • Replace the connectors and the ceiling light in the other direction

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The light bulb of your Toyota Fine-n will work normally. Good walk.