Changing the headlight bulb of a Toyota Ft-86 (2) is a very manipulation easy to make . No need to be a great handyman, it requires basic tools and no knowledge of mechanics. To perform this replacement, count about 10 minutes . However, before embarking on repairs, you will have to make sure that the malfunction comes from the bulb. We will first see how to find out where the problem comes from, then how to replace the faulty bulb.
The ceiling light of your Toyota Ft-86 (2) no longer works: various causes.
The bulb is defective . This is obviously the most common cause. Whatever happens, you will have to disassemble the light unit from the Toyota Ft-86 (2). To do this, you will have to follow the steps in the next part. To check it is very easy. If it's a filament bulb, you can visually check that this filament is broken. If on the other hand it is an LED bulb, you will have to check that the current flows properly using a voltmeter. Try to measure the voltage on the two connector poles. An electrical malfunction . It's less ordinary, however it can still happen on a Toyota Ft-86 (2). It happens that there is a short circuit, or that a connector is dirty. In this case, examine the voltage at both poles. If the current does not flow properly, it will be necessary to follow the wiring until the origin of the fault is found. It also happens that the connectors are dirty. So, you will have to clean them using a specialized product and measure the voltage again.
How to replace the ceiling bulb of your Toyota Ft-86 (2)
Now that you have found the source of the fault, you are sure the problem is with the bulb. We will see how to replace the ceiling light bulb point by point on a Toyota Ft-86 (2).
- Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
- Remove the connector
- Dismount the ceiling light so as to have access to the bulb
- Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must match
- Attach the new bulb carefully
- Replace the connectors and the ceiling light in the other direction
You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The interior light bulb of your Toyota Ft-86 (2) should work normally. Good walk.