Replacing the light bulb in a Toyota Fxs is an extremely manipulation easy to perform . There is no need to be a great handyman, this repair requires few tools and no knowledge of mechanics. To do this, count ten minutes . However before starting the repairs, it is necessary to make sure that the problem originated from the bulb. We will first see how to find out where the problem came from, then how to replace the burnt out bulb.
The ceiling bulb of your Toyota Fxs does not work anymore: the different causes.
The bulb is defective . This is of course the most common reason. In all cases, you will have to dismantle the lighting unit of your Toyota Fxs. To do this, it is necessary to follow the steps in the following paragraph. To control it is extremely easy. If ever it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, it is necessary to check that the electricity is circulating properly by using a voltmeter. Remember to take the voltage on both sides of the connector. An electrical problem . It's less ordinary, but it can still happen on this Toyota Fxs. It happens that there is a short-juice, or that a connector is dirty. In this case, check the tension at both ends. If the electricity does not pass properly, it will be necessary to follow the electric wires until you see the cause of the failure. It also happens that the connectors are dirty. So, you will have to clean them with a specialized product and measure the tension.
How to replace the ceiling light bulb on your Toyota Fxs
Now that you have found the cause of the failure, you are certain that the problem originated from the bulb. We will see how to replace the ceiling light bulb step by step on this Toyota Fxs.
- Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
- Remove the connector
- Dismount the ceiling light so as to have access to the bulb
- Remove the bulb and compare it with the new one. Naturally, the size and the base must match
- Place the new bulb gently
- Reposition the connectors and the ceiling light in the opposite direction
You can now turn on the ignition and check that the bulb is working properly. And now, voila ! The light bulb of your Toyota Fxs will work normally. Enjoy the road.