Changing the bulb of the ceiling lamp of a Toyota Land Cruiser Serie 150 is a very operation easy to perform . No need to be a great mechanic, it requires basic tools and no mechanical knowledge. To do this, count ten minutes . However before launching into repairs, you will need to make sure that the problem must come from the bulb. We will find out above all how to know where the problem should come from, then how to change the defective bulb.change dome light-bulb-Toyota-Land-Cruiser-150-Serie

The bulb of the ceiling lamp of your Toyota Land Cruiser Serie 150 does not work anymore: the different origins.

The bulb is defective . This is obviously the most common reason. In all cases, you will need to remove the lighting unit from your Toyota Land Cruiser Serie 150. To do this, you will need to follow the steps in the next section. To control it is very easy. If ever it is a filament bulb, you can visually check that its filament is broken. If, on the other hand, it is an LED bulb, it will be necessary to check that the electricity circulates correctly by using a voltmeter. Try to take the voltage on both sides of the connector. An electrical concern . It's less common, however it can still happen on a Toyota Land Cruiser Serie 150. It is possible that there is a short-juice, or that a connector is dirty. In this situation, check the voltage at both poles. If the electricity does not pass correctly, you will have to follow the electric cables until you perceive the origin of the failure. It is also possible that the connectors are dirty. In this case, it will be necessary to clean them using a specialized product and measure the tension.

How to replace the light bulb on your Toyota Land Cruiser Serie 150

Now that you have found the cause of the failure, you are certain that the problem must come from the bulb. We will see how to change the bulb of the ceiling light step by step on a Toyota Land Cruiser Serie 150.

  • Remove the ceiling lamp with a flat screwdriver. Insert it into the groove to pry.
  • Disconnect the connector
  • Disassemble the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must be identical
  • Attach the new bulb gently
  • Replace the connectors and the ceiling light in the other direction

You can now switch on the ignition and check that the bulb works properly. And voila, it's done! The ceiling lamp of your Toyota Land Cruiser Serie 150 will operate normally. Good walk.