Replace the light bulb in a Toyota Mr 3 is an extremely easy to make . No need to be an excellent handyman, this repair requires few tools and no mechanical knowledge. To do this, count ten minutes . However before you start repairing, you must make sure that the problem comes from the bulb. We will first see how to find out where the problem comes from, then how to replace the damaged bulb.
The interior lighting of your Toyota Mr 3 does not work anymore: the different causes.
The bulb is defective . This is of course the most common reason. In all cases, you will have to remove the lighting unit from the Toyota Mr 3. To do this, you must follow the steps in the next paragraph. To verify it is extremely easy. When it is a filament bulb, you can visually check that its filament is broken. When, on the other hand, it is an LED bulb, you must check that the electricity is flowing correctly using a voltmeter. Try to take the voltage on both sides of the connector. An electrical problem . It is less frequent, however it can still happen on this Toyota Mr 3. It may be that there is a false contact, or that a connector is dirty. In this case, inspect the voltage at both ends. When the electricity does not pass correctly, you must follow the electric wires until you find the origin of the failure. The connectors may also be dirty. In this case, they must be cleaned with a specialized product and the voltage measured.
How to replace the ceiling light bulb on your Toyota Mr 3
Once you find the source of the fault, you can be sure that the problem is with the bulb. We will see how to replace the ceiling light bulb step by step on this Toyota Mr 3.
- Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
- Disconnect the connector
- Disassemble the ceiling light to access the bulb
- Remove the bulb and compare it with the new one. It is of course necessary that the size and the base are identical
- Install the new bulb carefully
- Replace the connectors and the ceiling light in the other direction
You can now turn on the ignition and check that the bulb is working properly. It's good it's done ! The bulb of the ceiling lamp of your Toyota Mr 3 should work normally. Enjoy the road.