Changing the light bulb in a Toyota Mtrc is an extremely easy to execute . There is no need to be a great mechanic, it requires basic tools and no mechanical knowledge. To perform this operation, count ten minutes . However before you start the work, it is necessary to make sure that the problem comes from the bulb. We will find out first how to find out where the problem comes from, then how to replace the burnt out bulb.change-bulb-ceiling-Toyota-Mtrc

The ceiling bulb of your Toyota Mtrc does not work anymore: the different origins.

The bulb is defective . This is obviously the most common reason. Whatever happens, you're going to have to remove the light block from the Toyota Mtrc. To do this, it is necessary to follow the steps in the next section. To verify it is extremely easy. When it is a filament bulb, you can visually check that the filament is broken. When, on the other hand, it is an LED bulb, it is necessary to check that the current flows properly by using a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical concern . It's less ordinary, however it can still happen on a Toyota Mtrc. It is possible that there is a short-juice, or that a connector is dirty. In this case, inspect the tension at both poles. When the current does not pass properly, you will have to follow the electric cables until you see the source of the failure. It is also possible that the connectors are dirty. In this case, it will be necessary to clean them with a specialized product and measure the tension again.

How to replace the light bulb on your Toyota Mtrc

Now that you have found the source of the failure, you are sure that the problem is with the bulb. We will see how to replace the light bulb step by step on a Toyota Mtrc.

  • Remove the ceiling lamp using a flat screwdriver. Introduce it into the groove to make a lever.
  • Disconnect the connector
  • Disassemble the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it with the new one. Obviously the size and the base must be identical
  • Place the new bulb carefully
  • Replace the connectors and the ceiling light in reverse order

You can now turn on the ignition and check that the bulb is working properly. And voila, it's done! The ceiling lamp of your Toyota Mtrc will operate normally. Enjoy the road.