Changing the light bulb in a Toyota Starlet is an extremely simple to execute . No need to be a great handyman, it requires basic tools and no knowledge of mechanics. To carry out this replacement, count about 10 minutes . However before starting the repairs, you will need to make sure that the problem comes from the bulb. We will find out first how to find out where the problem is coming from, then how to change the defective bulb.change dome light-bulb-Toyota Starlet

The interior lighting of your Toyota Starlet does not work any more: the different causes.

The bulb is defective . This is obviously the most common cause. In all cases, you will need to disassemble the light block from the Toyota Starlet. To do this, you will have to follow the steps in the next paragraph. To control it is extremely simple. In case it is a filament bulb, you can visually check that this filament is broken. In the case where on the other hand it is an LED bulb, it will be necessary to check that the current circulates correctly by using a voltmeter. Try to take the voltage on both sides of the connector. An electrical concern . It's less common, but it can still happen on a Toyota Starlet. It is possible that there is a false contact, or that a connector is dirty. In this situation, check the tension at both ends. In the event that the current does not flow correctly, you will have to follow the wiring until you find the source of the failure. It is also possible that the connectors are dirty. In this case, you will have to clean them with a specialized product and measure the tension again.

How to replace the ceiling light bulb on your Toyota Starlet

Now that you have found the cause of the failure, you are sure that the problem comes from the bulb. We will see how to change the ceiling light bulb point by point on a Toyota Starlet.

  • Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Disassemble the ceiling light to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must be identical
  • Attach the new bulb gently
  • Replace the connectors and the ceiling light in reverse order

You can now switch on the ignition and check that the bulb is working properly. And now, voila ! The ceiling lamp of your Toyota Starlet will operate normally. Enjoy the road.