Replacing the light bulb in a Toyota Yaris 2 Ts is a super manipulation simple to make . There is no need to be a great mechanic, this repair requires basic tools and no knowledge of mechanics. To carry out this replacement, count ten minutes . But before you get started with repairs, you need to make sure that the problem stems from the bulb. We will see first how to know where the problem came from, then how to replace the burnt out bulb.change-bulb-ceiling-toyota-yaris-2-ts

The ceiling bulb of your Toyota Yaris 2 Ts does not work anymore: the different reasons.

The bulb is defective . This is obviously the most common reason. Whatever happens, you will have to dismantle the lighting unit of your Toyota Yaris 2 Ts. To do this, follow the steps in the next section. To control it it's super simple. When it is a filament bulb, you can visually check that its filament is broken. When, on the other hand, it is an LED bulb, you must check that the electricity is flowing correctly thanks to a voltmeter. Remember to measure the voltage on both sides of the connector. An electrical problem . It's less ordinary, however it can still happen on a Toyota Yaris 2 Ts. It is possible that there is a false contact, or that a connector is dirty. In this case, inspect the tension at both ends. When the electricity does not pass correctly, it will be necessary to follow the electric wires until you find the origin of the failure. It is also possible that the connectors are dirty. In this case, they must be cleaned with a specialized product and the voltage measured.

How to replace the ceiling light bulb on your Toyota Yaris 2 Ts

Now that you have found the cause of the failure, you are certain that the problem originated from the bulb. Let's see how to replace the light bulb point by point on a Toyota Yaris 2 Ts.

  • Remove the ceiling light using a flat screwdriver. Introduce it into the groove to make a lever.
  • Disconnect the connector
  • Dismount the ceiling light so as to have access to the bulb
  • Remove the bulb and compare it to the new one. Obviously, the size and the base must match
  • Attach the new bulb carefully
  • Replace the connectors and the ceiling light in the other direction

You can now switch on the ignition and check that the bulb is working properly. It's good, voila! The ceiling lamp of your Toyota Yaris 2 Ts should work normally. Enjoy the road.