Changing the light bulb in a Toyota Yaris 2 is an extremely manipulation simple to execute . No need to be a great mechanic, it requires few tools and no knowledge of mechanics. To carry out this operation, plan about 10 minutes . However before you start the work, it is necessary to make sure that the problem comes from the bulb. We will see at first how to find out where the problem is coming from, then how to replace the faulty bulb.change-bulb-ceiling-Toyota-Yaris-2

The ceiling lighting of your Toyota Yaris 2 does not work anymore: the different origins.

The bulb is defective . This is obviously the most common cause. Whatever happens, you will have to dismantle the lighting unit of your Toyota Yaris 2. For this, you must follow the steps in the next paragraph. To control it is extremely simple. If ever it is a filament bulb, you can visually check that its filament is broken. If on the other hand it is an LED bulb, it is necessary to check that the electricity circulates correctly by using a voltmeter. Try to measure the voltage on both sides of the connector. An electrical problem . It is less frequent, however it can still happen on a Toyota Yaris 2. It is possible that there is a false contact, or that a connector is dirty. In this situation, check the voltage at both poles. If the electricity does not pass correctly, you will have to follow the electric wires until you find the source of the failure. It is also possible that the connectors are dirty. In this case, it will be necessary to clean them using a specialized product and measure the tension.

How to replace the light bulb on your Toyota Yaris 2

Once you have found the source of the failure, you are certain that the problem is with the bulb. We will see how to replace the light bulb step by step on a Toyota Yaris 2.

  • Remove the ceiling lamp using a flat screwdriver. Pass it in the groove to make a lever.
  • Remove the connector
  • Dismount the ceiling light so as to access the bulb
  • Remove the bulb and compare it to the new one. Obviously, the dimensions and the base must match
  • Carefully place the new bulb
  • Reposition the connectors and the dome following the reverse procedure

You can now switch on the ignition and check that the bulb is working properly. And voila, it's done! The light bulb of your Toyota Yaris 2 should work normally. Good road.