Changing the light bulb of a Toyota Yaris is a super manipulation easy to make . You don't have to be a great mechanic, it requires few tools and no mechanical knowledge. To carry out this replacement, count ten minutes . However before you start the work, it is necessary to make sure that the problem comes from the bulb. We will find out first how to find out where the problem is coming from, then how to replace the faulty bulb.
The ceiling lighting of your Toyota Yaris does not work anymore: the different origins.
The bulb is defective . This is of course the most common reason. Whatever happens, you're going to have to remove the light unit from the Toyota Yaris. To do this, it is necessary to follow the steps in the next section. To control it is super easy. If ever it is a filament bulb, you can visually check that the filament is broken. If, however, it is an LED bulb, it is necessary to check that the current flows properly using a voltmeter. Remember to take the voltage on both sides of the connector. An electrical concern . It's less ordinary, but it can still happen on this Toyota Yaris. There may be a short juice, or a connector may be dirty. In this case, inspect the voltage at both ends. If the current does not pass properly, you must follow the electric cables until you find the cause of the failure. The connectors may also be dirty. In this case, it will be necessary to clean them with a specialized product and measure the tension again.
How to replace the light bulb on your Toyota Yaris
Now that you have found the cause of the failure, you are certain that the problem comes from the bulb. Let's see how to replace the light bulb point by point on this Toyota Yaris.
- Remove the ceiling lamp with a flat screwdriver. Introduce it into the groove to make a lever.
- Disconnect the connector
- Dismount the ceiling lamp in order to access the bulb
- Remove the bulb and compare it to the new one. It is of course necessary that the dimensions and the base are identical
- Attach the new bulb gently
- Replace the connectors and the dome following the reverse procedure
You can now switch on the ignition and check that the bulb works properly. It's good, voila! The ceiling lamp of your Toyota Yaris should work normally. Good road.