That it concerns low beam, high beams or turn signals, the changing a light bulb is a very operation convenient to execute . But if a fire never works, you should not wait to repair it. Because some people ignore it, but it remains reprehensible by a fine which can go up to 68 euros. Of course, you must first replace them for safety reasons. This is therefore how to change the bulb of a headlight on a Citroen Nemo, point by point. Then we will see how to correctly adjust them.change-headlight-bulb-Citroen-Nemo

How to change the bulb of a Citroen Nemo headlight

Today, there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little put on the side now, and more and more bulbs LED . These are much less greedy in electricity and more resistant. Whatever the type of bulb, the way to change them will be similar. So that's the logic to follow for change the bulb of your Citroen Nemo .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear portion of the fire. It will sometimes be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from the Citroen Nemo
  • Compare it with the new one to be sure it is suitable
  • Position the new bulb gently, then fix it correctly
  • Reclip the rubber cover then all the elements following the reverse procedure

Now that everything is back in order, check that it works! This one should have an intensity equal to the other. It is essential to have totally similar products.

Adjusting the headlights of a Citroen Nemo

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy the motorists you meet. It is therefore advisable to take the time to adjust them correctly. To do this, simply position your vehicle facing a wall. To start one meter from the wall, then 5 or 6 meters. Then just set the light in question the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.