Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely manipulation easy to make . But when a fire no longer works, you should not wait to change it. Because many ignore it, but it is condemnable by a penalty of up to 68 euros. Of course, it is first necessary to repair them for safety reasons. This is therefore how to change the bulb of a headlight on a Citroen Osmose, point by point. Thereafter, we will find out how to correctly adjust them.
How to change the bulb of a Citroen Osmose headlight
Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , put on the side now, and more and more light bulbs LED . The latter consume much less electricity and are more robust. Regardless of the type of bulb, the way to change them will be similar. You will find below the logic to follow for change the bulb of your Citroen Osmose .
- Disconnect the battery in order to work more comfortably.
- Free access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Unclip or unscrew the damaged bulb of your Citroen Osmose
- Compare it with the news to make sure it fits
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover and all components in reverse order
Once everything is in order, check that it works! The latter should have the same intensity as the other. It is important to have perfectly similar models.
Adjusting the headlights of a Citroen Osmose
After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists in the other direction. That's why you have to take the time to adjust them correctly. To do this, simply place your car facing a wall. First a short distance, then a few meters. Thereafter, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither goes, there are very good tutorials on this.