That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely easy to make . But if a fire no longer works, we should not delay changing it. Because some people do not know it, but it remains reprehensible by a fine which can go up to 68 euros. Of course, you will first have to change them for security reasons. So here is how to replace the bulb of a headlight on a Citroen Picasso, point by point. In a second step, we will see how to properly adjust them.change-headlight-bulb-Citroen-Picasso

How to change the bulb of a Citroen Picasso headlight

Today there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and more and more bulbs LED . The latter consume much less electricity and are more enduring. Regardless of the type of bulb, the way to change them will be the same. This is the process to follow in order to replace the bulb of your Citroen Picasso .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the broken bulb of the Citroen Picasso
  • Compare it well with the new one to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in reverse order

Now that everything is back in order, check that it works! The latter should have a similar intensity to the other. It is essential to have perfectly similar models.

How to set the headlights of a Citroen Picasso

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things, so as not to disturb motorists in front. We must therefore take the time to adjust them properly. To do this, you have to place your car facing a wall. At first one meter from the wall, then five or six meters. Secondly, you just have to adjust the light with the new bulb in the same way as the other by comparing the halos. If neither of them works, there are tutorials that can help you.