Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely manipulation simple to do . But when a fire doesn't work, you don't have to wait to change it. Because many ignore it, but it remains reprehensible by a ticket which can go up to 68 euros. Obviously, it is necessary to begin by replacing them for safety reasons. Here is how to change the bulb of a headlight on your Citroen Revolte, point by point. Second, we will find out how to set them correctly.change-headlight-bulb-Citroen-Revolte

How to replace the bulb of a Citroen Revolte headlight

Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected today, and many bulbs LED . These are less energy intensive and more robust. Regardless of the type of bulb, the way to replace them will be the same. Here is the procedure to follow in order to change the bulb of your Citroen Revolte .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the defective bulb from your Citroen Revolte
  • Compare it well with the new one to be sure it fits
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the components, following the reverse procedure

Once everything is in order, check that it works! This should have an intensity similar to the other. It is important to have perfectly similar models.

How to adjust the headlights of a Citroen Revolte

Now that the fire is in place, it remains possible that it is out of order. It is extremely important that two lights at the same height and focused the same way. Especially so as not to annoy the motorists you meet. So take the time to adjust them correctly. To do this, you just have to place your car in front of a wall. To start one meter from the wall, then 5 or 6 meters. Second, just set the fire in question the same way as the other by comparing the halos. If neither goes, there are very good tutorials on this.