That it concerns low beam, high beams or turn signals, the bulb replacement is a super manipulation simple to execute . But if a fire does not work, it should not be long before replacing it. Because some people forget it, but it is reprehensible by a fine which can go up to 68 euros. Of course, it is necessary to replace them first for safety reasons. This is how to change the bulb of a headlight on your Citroen Saxo Vts, point by point. Then we will find out how to properly adjust them.
How to replace the bulb of a Citroen Saxo Vts headlight
Now there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , a little neglected now, and a lot of bulbs LED . They consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be the same. Here is the logic to follow in order to change the bulb of your Citroen Saxo Vts .
- Disconnect the battery so that you can work more comfortably.
- Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the broken bulb of your Citroen Saxo Vts
- Compare it well with the new one to make sure it is suitable
- Position the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in the other direction
Now that everything is in place, check that it works! The latter should have an intensity equal to the other. It is essential to have perfectly similar products.
How to adjust the headlights of a Citroen Saxo Vts
After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. Especially so as not to annoy the motorists you meet. It is therefore advisable to take the time to settle them properly. To do this, simply position your vehicle in front of a wall. First a short distance, then a few meters. Then, you just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.