Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super manipulation simple to execute . But if a fire stops working, you should not wait to repair it. Because many forget it, but it is punishable by a fine which can go up to 68 euros. Of course, it is necessary to first change them for safety reasons. So this is how to change the bulb of a headlight on the Citroen Spacetourer, step by step. Second, we will find out how to set them correctly.change-bulb-headlight-Citroen-Spacetourer

How to replace the bulb of a Citroen Spacetourer headlight

Nowadays, there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected now, and lots of bulbs LED . They consume much less electricity and are more enduring. Whatever the type of bulb, the way to replace them will be similar. You will find below the logic to follow in order to change the bulb of your Citroen Spacetourer .

  • Disconnect the battery so that you can work more serenely.
  • Clear access to the rear part of the light. It will be necessary to dismantle the battery from time to time, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the broken bulb from your Citroen Spacetourer
  • Compare it with the new one to make sure it fits
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all the components in reverse

Once everything is in order, test the bulb! The latter should have an intensity equal to the other. It is essential to have totally similar products.

Adjusting the headlights of a Citroen Spacetourer

Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to upset the drivers you meet. They must therefore be set correctly. To do this, you must place your car facing a wall. First a meter from the wall, then 5 or 6 meters. Second, you just need to set the light in question to the same height as the other by comparing the halos. If the two are wrong, there are tutorials that can help.