That it concerns low beam, high beams or turn signals, the bulb replacement is a super repair convenient to perform . But if ever a fire does not work any more, one should not wait to replace it. Because some people ignore it, but it is reprehensible by a fine of up to 68 euros. Obviously, it is necessary to replace them first for safety reasons. Here is how to change the bulb of a headlight on the Citroen Traction 11, step by step. Next, we will find out how to properly adjust them.change-bulb-headlight-Citroen-Traction-11

How to replace the bulb of a Citroen Traction 11 headlight

Now there are various types of headlight bulbs. The most common are halogen , but we can also find Xenon , slightly put on the side today, and a lot of bulbs LED . These consume much less energy and endure more. Regardless of the type of bulb, the way to replace them will be the same. So this is the logic to follow for changing the bulb of your Citroen Traction 11 .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the broken bulb of the Citroen Traction 11
  • Compare it with the new one to be sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in reverse order

Once everything is in place, check that it works! This one should display the same intensity as the other. It is essential to have completely similar models.

How to configure the headlights of a Citroen Traction 11

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused in the same way. In particular so as not to disturb motorists in front. They should therefore be adjusted appropriately. To do this, you have to place your automobile in front of a wall. At first one meter from the wall, then a few meters. Then, you just have to adjust the light with the new bulb in the same way as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.