Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely manipulation simple to perform . But if a fire does not work, it should not be long before replacing it. Because many do not know it, but it remains condemnable by a sanction which can go up to 68 euros. Obviously, it will first have to be repaired for security reasons. Here is how to change the bulb of a headlight on your Citroen Traction 15, point by point. In the second step, we will find out how to properly resolve them.change-bulb-headlight-Citroen-Traction-15

How to change the bulb of a Citroen Traction 15 headlight

Today, there are various types of headlight bulbs. The most common are halogen , but we can also find Xenon , somewhat put on the side now, and lots of bulbs LED . These are much less energy consuming and more resistant. No matter what kind of bulb, the way to change them will be the same. You will find below the logic to follow for changing the bulb of your Citroen Traction 15 .

  • Disconnect the battery so that you can work more quietly.
  • Clear access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from the Citroen Traction 15
  • Compare it well with the new one to make sure it is suitable
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover then all the elements following the reverse procedure

Once everything is in place, test the bulb! This should display an intensity equal to the other. It is important to have perfectly similar products.

How to adjust the headlights of a Citroen Traction 15

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists opposite. So take the time to settle them properly. To do this, you must place your vehicle facing a wall. First a meter from the wall, then a few meters. In a second step, it is enough to adjust the fire in question at the same height as the other according to the reflections on the wall. If neither of them goes, there are tutorials very well done on this subject.